Differences

This shows you the differences between two versions of the page.

--- pub:installation_for_idocs_6.x [2021/10/21 10:57] – [Step 3. Complete the Installation on the Power System] kkramer
+++ pub:installation_for_idocs_6.x [2022/06/25 17:02] (current) – external edit 127.0.0.1
@@ Line 146: / Line 146: @@
 For the Public authority for data parameter user *RWX
 For the Public authority for object parameter use *ALL
-Then enter to create and note the directory path.
+Then enter to create and note the directory path.\\
 Example screenshot:
+{{:pub:idocs:install0001.jpg?600|}}
 Add the new directory path to the CLASSPATH.
@@ Line 171: / Line 171: @@
 **NOTE: Be cautious as once this command is applied it will copy the settings from one library to another and the only way to restore will be from your backup tapes.**
-After confirming the Java version you are using and the location of the IFDJAVA.JAR file sign off and then back on.
+After confirming the Java version you are using and the location of the IFDJAVA.JAR file sign off and then back on.\\
-Add the IDOCS697 library to the top of your library list
+Add the new iDocs 6.x library to the top of your library list.\\
-Type COPYDATA on the command line and prompt with option F4
+Type COPYDATA on the command line and prompt with option F4.\\
-Fill in the parameters
+Fill in the parameters:
-From Library parameter will be your current iDocs library
+From Library parameter will be your current iDocs library,
-To Library parameter will be your new iDocs library
+To Library parameter will be your new iDocs library.\\
-Output queue for log file you can keep as QPRINT with *LIBL for the library
+Output queue for log file, \\
-Restore Jar files do dir parameter will be the directory path to install the new IFDJAVA.JAR file.
+Keep as QPRINT with *LIBL for the library.\\
-Current system JRE version will be your Java version you are using.
+Restore Jar files do dir parameter will be the directory path to install the new IFDJAVA.JAR file.\\
+Current system JRE version will be your Java version you are using.\\
 Sample screenshot:
+{{:pub:idocs:install0002.jpg?600|}}
 Once you confirm the information is correct, select [Enter] to process
@@ Line 190: / Line 191: @@
 You can bring up iDocs by typing GO IDOCS and you will see all your information.
+===COPYDATA: Run the COPYDATA command to copy all your settings from your current iDocs library===
 The next step is to copy over your form, check, and engine definitions and spool file mapping. Use this Command to copy your information from your old FMG library to your new FMG library. Type the command **COPYDATA** and F4 to Prompt: \\
-**COPYDATA** \\
 \\
 IMPORTANT: //Insure to use the correct library names on the FROM library and TO library fields.  Once done, it cannot be undone.//
@@ Line 238: / Line 239: @@
  Auditing value for objects . . .   *SYSVAL       *SYSVAL, *NONE, *USRPRF...
  Scanning option for objects  . .   *PARENT       *PARENT, *YES, *NO, *CHGONLY
  Restricted rename and unlink . .   *NO           *NO, *YES
 </pre></html>
-**To save memory, in version 6.94 any iMail log data will not be migrated into the new library. You will have to visit the old library to view the old email logging entries.**
+===Steps to confirm that the IFDJAVA.JAR file was restored to the expected directory configured in the COPYDATA step when upgrading iDocs.===
+==Step 1. Confirm that the IFDJAVA.JAR file was installed==
+  - Confirm that the IFDJAVA.JAR file is in the expected directory by using the WRKLNK command to navigate to the directory and inspecting the directory for the file.
+  - If the file is in the directory, select the file with option 8=Display attributes and then selecting the [Enter] key.
+  - Once the attributes are displayed, page down one page to view Creation Date/Time, Last access data/time, Data change data/time, and Attribute change date/time.
+  *    If this reflects current changes, then you are done.
+  *    If they reflect the values of the originally installed file, then select F3 to exit and continue instructions.
+Using the WRKLNK command navigate to /qibm/UserData/Java400/ext [The command is **wrklnk '/qibm/UserData/Java400/ext/*'**] and inspect the directory for the IFDJAVA.JAR file.
+If you don’t find the file continue with the next Step 2.
+If you find the IFDJAVA.JAR file select the file with option 8=Display attributes and inspect the dates to confirm if the file is the currently installed file.  If it’s the currently installed file, then you can simply move it to the directory you want the file to be saved to for use.  If the file is not currently installed, then it’s most likely the file in use.  At this point you will want to move the file to a new directory.  Follow the steps in Step 2 of the instructions to move the file or delete.
+==Step 2. Remove or move the currently installed poi and IFDJAVA.JAR files to new directory==
+**Note:** These files will not be needed anymore once the new IFDJAVA.JAR file is restored to the directory.  Optionally, these files can be deleted instead of being moved to a new directory.
+**To Move the files to a new directory:**
+Make a new directory by using the MKDIR command for example mkdir ‘/home/idocs681’
+Select the poi and IFDJAVA.JAR files in the original directory with option 10 to move to the newly created directory
+**To delete the files:**
+Select the poi and IFDJAVA.JAR files with option 4=Remove and [Enter]
+===Step 3. Restore the new IFDJAVA.JAR file to the directory of your choice===
+On the command line type RST and prompt with F4
+Fill in the parameters as shown below and select [Enter] to execute
+**Device** = ‘/qsys.lib/fmg.lib/jarfiles.file’ [This is where we are getting the files from]\\
+**Objects: Name** = ‘/qibm/userdata/java400/ext/ifdjava.jar’ [This is the file we need]\\
+**Include or Omit** = *INCLUDE [We want the file to be included]\\
+New object name = ‘/xxxx/ifdjava.jar’ [xxxx equals the directory path you want to use.  For example ‘/qibm/ifdjava.far’]\\
+**New pattern: Pattern** = ‘*’ [Keep the default]\\
+**Include or Omit** = *INCLUDE [We want the file to be included]\\
+Sample screenshot below…
+<html><pre>
+                              Restore Object (RST)
+ Type choices, press Enter.
+ Device . . . . . . . . . . . . .   '/qsys.lib/fmg.lib/jarfiles.file'
+                + for more values
+ Objects:
+   Name . . . . . . . . . . . . .   'qibm/userdata/java400/ext/ifdjava.jar
+   Include or omit  . . . . . . .   *INCLUDE      *INCLUDE, *OMIT
+   New object name  . . . . . . .   '/qibm/ifdjava.jar'
+                + for more values
+ Name pattern:
+   Pattern  . . . . . . . . . . .   '*'
+   Include or omit  . . . . . . .   *INCLUDE      *INCLUDE, *OMIT
+                + for more values
+                                                                        More...
+ F3=Exit   F4=Prompt   F5=Refresh   F10=Additional parameters   F12=Cancel
+ F13=How to use this display        F24=More keys
+</pre></html>
+Once done, navigate to the directory using the WRKLNK command to confirm the new file has been installed.
+If installed, then log-off/log-on and test
+If not installed, inspect the job log for any error and try to resolve any issues.
+===Step 4: Testing===
+Try sending out an email.
+  - If it works and you receive your test email, then you are done.
+  - If you do not receive a Java error because the .jar file can’t be located, then you will need to add a CLASSPATH setting.  See below for how to setup the CLASSPATH.  Once you setup the CLASSPATH, log-off/log-on and retest.
+===Instructions To Add CLASSPATH to run IFDJAVA.JAR file===
+**Notes before we setup Classpath:**
+Move the ifdjava.jar file to a directory on the IBMi that is not in /qibm/UserData/Java400/ext
+Example /idocs/idocs694/
+** To add CLASSPATH:**
+Type WRKENVVAR LEVEL(*SYS) on the command line and [Enter]
+Note: You want the level to be *SYS and not *JOB.  *JOB is for the current job only
+If a CLASSPATH already exist, then take option 2. Change on the CLASSPATH to add to the new value.
+To Add to the New Value parameter, add the new string value after the starting single quote and end the string with a semicolon at the end of the new string value and the start of the current value.  Then [Enter] to save.
+Example: If we are adding /idocs/idocs694/ifdjava.jar to '/qopensys/QIBM/ProdData/JavaVM/jdk60/32bit', then it would look like this:
+'/idocs/idocs694/ifdjava.jar:/qopensys/QIBM/ProdData/JavaVM/jdk60/32bit'
+ If a no CLASSPATH already exist, then take option 1. Add on the first row and type CLASSPATH then [Enter]
+Example:
+<html><pre>
+                       Work with Environment Vars (*SYS)
+ Type options, press Enter.
+=Add   2=Change   4=Remove   5=Display details   6=Print
+ Opt  Name                        Value
+  .
+  .   JAVA_HOME                   '/qopensys/QIBM/ProdData/JavaVM/jdk' >
+      JAVA_OPTS                   '-Dos400.awt.native=true -Djava.awt' >
+                                                                         Bottom
+</pre></html>
+In the Initial value parameter add the string value in between singles quotes, and then [Enter]\\
+Example ‘/idocs/idocs694/ifdjava.jar’
+Once done sign off and then back on for testing
+**To save memory, in version 6.94 and higher any iMail log data will not be migrated into the new library. You will have to visit the old library to view the old email logging entries.**