pub:configuring_iseries_printer_devices_to_work_with_idriver
Differences
This shows you the differences between two versions of the page.
| — | pub:configuring_iseries_printer_devices_to_work_with_idriver [2022/06/25 17:02] (current) – created - external edit 127.0.0.1 | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| + | ===== Configuring Printer Drivers ===== | ||
| + | |||
| + | Prior to configuring the software, the communication configuration needs to | ||
| + | be established between the iSeries and the Toshiba eStudio Printer. | ||
| + | The most reliable method for accomplishing this task is to create a remote | ||
| + | printer device. The format of the command is out lined below: | ||
| + | |||
| + | < | ||
| + | CRTDEVPRT DEVD(printer_name) DEVCLS(*LAN) TYPE(3812) MODEL(1) | ||
| + | LANATTACH(*IP) PORT(9100) ATTACH(*DIRECT) ONLINE(*YES) FONT(11 | ||
| + | *NONE) FORMFEED(*AUTOCUT) SEPDRAWER(*FILE) PRTERRMSG(*INQ) | ||
| + | MSGQ(*LIBL/ | ||
| + | LINESPEED(19200) WORDLEN(8) PARITY(*NONE) STOPBITS(1) | ||
| + | TRANSFORM(*YES) MFRTYPMDL(*HP4) PPRSRC1(*LETTER) | ||
| + | PPRSRC2(*LETTER) ENVELOPE(*NUMBER10) ASCII899(*NO) IMGCFG(*NONE) | ||
| + | CHRID(*SYSVAL) RMTLOCNAME(IP_Adress) SYSDRVPGM(*HPPJLDRV) | ||
| + | </ | ||
| + | |||
| + | From the command above replace the printer name with your actual naming | ||
| + | convention for your printer. Also, in the last line of the command, | ||
| + | RMTLOCNAME(IP_Address), | ||
| + | assigned to your Toshiba printer. | ||