User Tools

Site Tools


pub:configuring_iseries_printer_devices_to_work_with_idriver

Configuring Printer Drivers

Prior to configuring the software, the communication configuration needs to be established between the iSeries and the Toshiba eStudio Printer. The most reliable method for accomplishing this task is to create a remote printer device. The format of the command is out lined below:

CRTDEVPRT DEVD(printer_name) DEVCLS(*LAN) TYPE(3812) MODEL(1)
LANATTACH(*IP) PORT(9100) ATTACH(*DIRECT) ONLINE(*YES) FONT(11
*NONE) FORMFEED(*AUTOCUT) SEPDRAWER(*FILE) PRTERRMSG(*INQ)
MSGQ(*LIBL/QSYSOPR) ACTTMR(170) INACTTMR(*SEC15)
LINESPEED(19200) WORDLEN(8) PARITY(*NONE) STOPBITS(1)
TRANSFORM(*YES) MFRTYPMDL(*HP4) PPRSRC1(*LETTER)
PPRSRC2(*LETTER) ENVELOPE(*NUMBER10) ASCII899(*NO) IMGCFG(*NONE)
CHRID(*SYSVAL) RMTLOCNAME(IP_Adress) SYSDRVPGM(*HPPJLDRV)

From the command above replace the printer name with your actual naming convention for your printer. Also, in the last line of the command, RMTLOCNAME(IP_Address), replace the value IP_Address the IP address assigned to your Toshiba printer.

pub/configuring_iseries_printer_devices_to_work_with_idriver.txt · Last modified: 2022/06/25 17:02 by 127.0.0.1